>>> KIT AVAILABLE <<< All In One v3.1 PCB 56i Kit for sale !

[Synthex]

Kit Version 3.2 is now available !

http://www.megadrum.info/forums/viewtopic.php?f=3&t=1139


The 56i v3.2 Main Kit is :

- PCB : 1* All In One PCB v3.2 56 inputs (120mm x 100mm)
- PCB : 1* Keyboard PCB (40mm x 34mm)
- ICs : 1* Programmed Atmega644-20PU with bootloader and latest firmware
- ICs : 1* Programmed 18F14K50 USB 2.0
- ICs : 7* 74HC4851
- ICs : 1* L7805, 1* 6N138
- Resistors : 1* 47, 1* 470, 2* 100, 4* 220, 3* 1k, 1* 1k5, 11* 4k7, 1* 6k2, 2* 10k, 5* 47k
- Capacitors : 2* 15pF, 2* 22pF, 2* 1nF, 10* 100nF, 1* 470nF, 3* 47uF, 1* 100uF
- Inductors : 1* 68uH
- Diodes : 4* 1N4007, 3* 1N4148
- Crystals : 1* 20MHz, 1* 12MHz
- HE10 Connectors : 1* HDR-2X8, 1* HDR-2X13, 1* HDR-2X20, 1* IDC-2X8, 1* IDC-2X13, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 2* 2pin, 1* 3pin, 1* 4pin, 4* 5pin, 1* 6pin
- .100" Polarized Connectors with 30 cm leads : 2* 2pin, 1* 3pin, 1* 4pin, 3* 5pin
- .100" Connectors : 2* Jumper
- Connectors : 1* USB Type B Socket
- ICs Sockets : 1* 8 pin, 7* 16 pin, 1* 20 pin, 1* 40 pin
- Display : 1* LCD Display 2*16 White Characters Blue Backlight, 1* Blue LED
- Keyboard : 4* D6 Pushbutton Switch
- Wires : Flat Ribbon Cable 16 Conductors


The 56i v3.2 Inputs Kit is :

- PCB : 1* 32 inputs PCB with USB (180mm x 40mm)
- PCB : 1* 24 inputs PCB (107mm x 40mm)
- Stacked jacks Connectors : 15* CLIFF S1-1125W with 30* CL1406 Nuts
- Connectors : 2* DIN 5 Pin Chassis Socket
- Connectors : 1* USB Type B Socket
- HE10 Connectors : 1* HDR-2X13, 1* IDC-2X13, 1* HDR-2X20, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 1* 4pin
- .100" Polarized Connectors with 30 cm leads : 1* 4pin
- .100" Connectors : 3* HDR-1X3
- .100" Connectors : 4* Jumper




Here is prices of kits :

56i v3.2 Main Kit : 89 euros
Registred airmail shipping around the world : 14 euros
Fees : 6 euros
Dmitri's donation : 10 euros
The total of the order for the MAIN KIT is 119 euros.


56i v3.2 Main Kit : 89 euros
56i v3.2 Inputs Kit : 37 euros
Registred airmail shipping around the world : 16 euros
Fees : 7 euros
Dmitri's donation : 10 euros
The total of the order for the MAIN KIT and INPUTS KIT is 159 euros.



Kits are a collection of parts and not a finished product, you have to solder and assemble it yourself.

Payment may be made by Bank Wire Transfer or by Paypal.

Please send me a private message to order the kit.
Thank you.

[pappawhiskey]

Synthex (or anyone who's built v3.2),

The position on the digital board for C1 (100uF capacitor) has three holes whereas the component only has two prongs. I haven't encountered this before. Are we supposed to put in some sort of jumper?

Thank you

[pfhor]

The position on the digital board for C1 (100uF capacitor) has three holes whereas the component only has two prongs. I haven't encountered this before. Are we supposed to put in some sort of jumper?

If you look at the picture of the finished board in the first post you can see which two holes to use.

[aquawicket]

Still have a FULL kit available?
How well does this kit's input strips fit into a DIY 1U rackmout case.

[Synthex]

Still have a FULL kit available?
How well does this kit's input strips fit into a DIY 1U rackmout case.

Of course, Kit v3.2 is available !
http://www.megadrum.info/forums/viewtopic.php?f=3&t=1139


1U rackmout case = 483mm(W) x 44mm(H)
32 inputs PCB with USB = 180mm (W)
24 inputs PCB = 107mm (W)
Stacked jacks Connectors CLIFF S1-1125W = 39mm (H)

It fits perfectly !