New Synthex 56i 3.2 - Only Kick working

[lawrence_doss]

I have a strange problem - Only the Kick input seems to work and none of the other inputs seem to work... Anybody faced any such problems? I am yet to check the connectivity between pin 7 of 32 pin cable and pin 15 of the IC 74HC4851, pin 8 of 32 pin cable and pin 12 of the IC 74HC4851 and so on and so forth...

[dmitri]

Check for shorts/breaks from pads all along to input pins on MUXers.
Check that the ground wires from pads are properly connected.

[lawrence_doss]

Hi dmitri, thanks for responding. I checked for continuity from pad to the corresponding pins on the 78451 and they seem to be ok and no shorts too. But still not working as they are supposed to. Would a reset help? I see this in my display and is this normal.

[dmitri]

The display is normal. If you've made changes to the configuration, reset to default settings.