new firmware 3 zone problem

[mguerette33]

hi, new firmware 04/06/2016 fixed the missing hit problem 100 percent, module with lcd, but now it seems like the edge of my ride is always triggering the first hit instead of bow if you hit 1 hit per second on the bow will always trigger edge , if you hit at 1/4 a second first hit edge sound and all the hit after are bow as the should be, yamaha 3 zone was working fine before firmware update, i tried to change treshold b treshhold dynamics gain and nothing is working, do you have any idea? the bell portion is working fine.

no alternate note on regular 6 channel, all the same bow note , first hit generate the 7 channel instead of 6 at 1 sec interval at 1/4 sec interval generate channel 7 once and channel 6 for the remaining.

[dmitri]

Please post screenshot of your settings and the MIDI Log showing the problem.

[mguerette33]

I will do that today or tomorrow , i screwed up saving my config from mdm , saved the wrong one , i needed to adjust some stuff, i tested some stuff and realize that it only happend when alt algorithm is on . id turn it off and readjust my setting all is fine, if alt algorithm is on nomather what setting the first hit note always fall on the edge happend only on the ride channel, i plugged cymbal on ride same behavior with adjustement first note again but cymbal are fine on their channel, i will try my ride on another channel, to see.