Need your help! --- USB MIDI Problems ---

[MarcMooga]

Yes this time only the snare is connected...

So I made 2 new videos... with 2 different laptops running native windows 7...
but still the same...

http://x2sys.homeip.net/megadrum/megadrum002.mov

http://x2sys.homeip.net/megadrum/megadrum003.mov

This seems to be no problem due to a computer(os/setting/hardware)...
I have the same results now on 3 different computers.

Now I will go on with testing the latency...

[MarcMooga]

Ok Latency Test Video:
http://x2sys.homeip.net/megadrum/latency.mov

Hearable missing 'Note Off' demonstrated with organ sound:
http://x2sys.homeip.net/megadrum/noteoff.mov

[MarcMooga]

Okay what can I do by myself...

I removed the pads connector cable to check if I did anything wrong.
I connected only the snare to a new soldered single connector.

But still the same problem...

Here is the video
http://x2sys.homeip.net/megadrum/onlysnare.mov


Each hit generates
1. 'Note Off' of the hit before, but only if there has been a hit before(after turning on the megadrum)
2. 'Note On' of the actual hit

[MarcMooga]

I tried now with several usb cables.
Is there a possibility to reset all settings?
of course i made changes to the pad settings...

[dmitri]

I tried now with several usb cables.
Is there a possibility to reset all settings?
of course i made changes to the pad settings...

If you don't set AutoLoadConf to Yes, on a power up MegaDrum loads default settings.

Do you see 2 MegaDrum MIDI interfaces for both MIDI In and MIDI Out when selecting MIDI devices in MIDI-OX?

[MarcMooga]

If you don't set AutoLoadConf to Yes, on a power up MegaDrum loads default settings.

Done!
After that still the same results.

Do you see 2 MegaDrum MIDI interfaces for both MIDI In and MIDI Out when selecting MIDI devices in MIDI-OX?

Yes...

[dmitri]

What happens if you use MIDIIN2?

[MarcMooga]

exactly the same ...

[dmitri]

I will be soldering a few boards tomorrow and I will try to reproduce it.

[MarcMooga]

Thanks Dmitri!
What do you think the problem is?
A hardware problem or a software problem?
Would a firmware update help?

Can I do something?