strange

[airflamesred]

Yes that's right for the steps you describe. The only way around this is to load from MDM. That, in turn, seems to stop input 2 from working.
From your post above you say inputs 2 and 3 are for hihat. Am I right in thinking there is no internal difference for these 2 inputs and it is OK to connect normal piezos?

[dmitri]

Yes that's right for the steps you describe.

I will try to reproduce the problem following the same steps.

The only way around this is to load from MDM. That, in turn, seems to stop input 2 from working.
From your post above you say inputs 2 and 3 are for hihat. Am I right in thinking there is no internal difference for these 2 inputs and it is OK to connect normal piezos?

All inputs are equal so you can connect piezos to any any inputs, including 2 and 3.

[airflamesred]

Good to know I don't have to re wire again!
Just started up without pads connected and appear to have the same issue. Obviously I can't test but but the activity light comes on at 'positional In', The screen on the bottom layer display appears to be in Russian? When the display goes to to UV a number of channels seem to have activity and then die away.
regards

[dmitri]

I tried to re-produce the problem but failed. Seems like the steps are missing something. You are doing it with default settings?

[airflamesred]

You are doing it with default settings?

I have changed some settings. Should I do a complete reset to default?

[dmitri]

Do it with default settings. If problem is gone post your settings with which you have the problem so that I could reproduce it.

[airflamesred]

I have reset MD and all seems well. The problem re starts when loading from MDM. I guess I should delete the mds file and start a new?

[dmitri]

Post this mds file here and I will see what wrong might be with it. Meanwhile you can start a new.

[airflamesred]

OK

[dmitri]

I loaded your settings into MegaDrum and still cannot reproduce the problem. But along the way I noticed strange MDM behavior (a bug) when switching between inputs which may have caused your MDM to send invalid settings to your MegaDrum and subsequently cause your problem. I will look into this MDM bug asap.