Tried on a 2nd computer:
There are 3 MIDI output ports available.
Output Port #1: Keystation Mini 32
Output Port #2: MegaDrum USB MIDI Port 1
Output Port #3: MegaDrum USB MIDI Port 2
Select an output port number for the firmware update (between 1 and 3):2
Opened MIDI Out port 2 .
There are 3 MIDI input ports available.
Output Port #1: Keystation Mini 32
Output Port #2: MegaDrum USB MIDI Port 1
Output Port #3: MegaDrum USB MIDI Port 2
Select an input port number for the firmware update (between 1 and 3):2
Opened MIDI In port 2 .
Firmware file is loaded
Firmware size is 62928 bytes
Transferring.. - 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. - 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. \ 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. \ 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. | 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. | 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. / 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. / 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. - 0% done.Read 0 bytes (error?)
Retrying on CRC error
Transferring.. - 0% done.Read 0 bytes (error?)
CRC error. File damaged.
SO, if there's a serial issue, how do I remedy that?