VH13 MG - No midi from Hihat Control

[dmitri]

So I understan you sorted out by correcting wiring and adding a pull up resistor.

[airflamesred]

Wow, this is like Blair Witch. This could be any number of things. What is sticking out to me is the red light on MDM, so this may be a sync issue.

[LouisCarter]

So I understan you sorted out by correcting wiring and adding a pull up resistor.

Exactly Dmitri, exept i didnt ad a resistor?

My lo-hilevel is still between 8 and 25, so not exactly smooth.

[dmitri]

I then suggest you to add a pull up resistor as per http://www.megadrum.info/forums/viewtop ... f=4&t=1986

[LouisCarter]

Ill buy a resistor tommorow and try it out.

But dont you think a lo-hilevel of 10-25 is very odd? It seems that the vh11 was much smoother

[dmitri]

The pull up resistor is meant to address low output from VH controllers.

[RockyFath]

Hi..i am a new user here. As per my knowledge you should Set AltIn according to a selected pedal input. For the low impedance input AltIn must be set to No and for the high impedance input AltIn must be set to Yes.Set LevelsAuto to No.Set LowLevel to a minimum (11).Set HiLevel to a maximum (1023).Go to LowLevel and press the pedal to within 5%-10% of fully closed (almost closed). In the top row of the LCD you will read current "raw level" reading. Set LowLevel just below the current "raw level" reading.