Issue with Millenium Hihat Pedal

Discussions related to MegaDrum Hardware

Re: Issue with Millenium Hihat Pedal

Postby danifc » Wed Oct 07, 2009 7:33 am

danifc
 
Posts: 35
Joined: Tue Jul 07, 2009 2:52 pm
Location: Algeciras,Cadiz (Spain)

Re: Issue with Millenium Hihat Pedal

Postby dmitri » Wed Oct 07, 2009 9:17 am

danifc wrote:Hi Dmitri!
I will try this afternoon,now i,m in the office!
P.D:With the MPC Config Tool I cannot upgrade firmware by now,What is the best option?
Should I install some bootloaderor something like that with midi-ox in windows xp?
Thanks ;)

If you're having problems updating firmware using MCT, then use MIDI-OX as described in viewtopic.php?f=3&t=622 starting from "Once you have the bootloader programmed follow this procedure:"
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Issue with Millenium Hihat Pedal

Postby danifc » Wed Oct 07, 2009 2:43 pm

Hi!
I tried that ,apply new firmware,low levels gives me 110 and high levels 181 wnhen i pressed the pedal.
The light still is "up" in the top left block... and the pedal doesn,t work as always :|
danifc
 
Posts: 35
Joined: Tue Jul 07, 2009 2:52 pm
Location: Algeciras,Cadiz (Spain)

Re: Issue with Millenium Hihat Pedal

Postby dmitri » Wed Oct 07, 2009 3:42 pm

danifc wrote:Hi!
I tried that ,apply new firmware,low levels gives me 110 and high levels 181 wnhen i pressed the pedal.
The light still is "up" in the top left block... and the pedal doesn,t work as always :|

1. Set AutoLevels to No
2. Set LowLevel to 170
3. Set HighLevel to 171
4. Set AutoLevels to Yes
5. Press the pedal a few times. What values do you have now in LowLevel and HighLevel?
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Issue with Millenium Hihat Pedal

Postby danifc » Wed Oct 07, 2009 4:00 pm

Lowlevels 170 and high levels 183...
danifc
 
Posts: 35
Joined: Tue Jul 07, 2009 2:52 pm
Location: Algeciras,Cadiz (Spain)

Re: Issue with Millenium Hihat Pedal

Postby dmitri » Wed Oct 07, 2009 4:35 pm

danifc wrote:Lowlevels 170 and high levels 183...

Toggle the impedance switch into the opposite position and repeat the test again.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Issue with Millenium Hihat Pedal

Postby danifc » Wed Oct 07, 2009 4:40 pm

Low levels 170 and high 171...
danifc
 
Posts: 35
Joined: Tue Jul 07, 2009 2:52 pm
Location: Algeciras,Cadiz (Spain)

Re: Issue with Millenium Hihat Pedal

Postby dmitri » Wed Oct 07, 2009 4:44 pm

Toggle the impedance switch back to the original position.
1. Set AutoLevels to No
2. Set LowLevel to 300
3. Set HighLevel to 301
4. Set AutoLevels to Yes
5. Press the pedal a few times. What values do you have now in LowLevel and HighLevel?
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Issue with Millenium Hihat Pedal

Postby dmitri » Wed Oct 07, 2009 6:26 pm

Please load this test firmware:
megadrum644_20_32_20091007.syx

It will be showing a number at the bottom left all the time.

1.Set impedance switch into the original position (switch Up)
What numbers are being shown with the pedal depressed and pressed?

2. Set impedance switch into alternative position (switch Down)
What numbers are being shown with the pedal depressed and pressed?
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Issue with Millenium Hihat Pedal

Postby danifc » Wed Oct 07, 2009 6:56 pm

With switch up: Depressed 303-304 Pressed 204
With Switch Down: Depressed 214 Pressed 216
danifc
 
Posts: 35
Joined: Tue Jul 07, 2009 2:52 pm
Location: Algeciras,Cadiz (Spain)

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 95 guests