MegaDrum Lite, kick input and hi-hat controller problem

[prank17]

Hi dmitri,
I bought from you the megadrum lite kit and the pedal input doesn't work at all, I have no signal.
I use the roland vh11 hihat.
I connected every single wire following the megadrum schematic.
Here some pictures ,maybe I did someting wrong:

IMG_2169.jpg

- from the 40 pin , the red cable goes to the ring of the high imp. pedal jack
- from the 38 pin , the black cable goes to the tip of the same jack
- from the 15 and 16 pin , the two red cables go to the sleeve of the same jack

I connected also the hihat head and it works.
Changing the altinput setting is useless.

Regards
Francesco

[dmitri]

1. If you use pin 38 (High impedance pedal input) then you must set AltIn to Yes.
2. Post the screenshot of the HiHat Pedal->Levels settings in MDM.
3. What do you mean by "pedal input doesn't work at all, I have no signal."?
4. What is the voltage on pin 38 when the pedal is fully closed?
5. What "raw" value is shown on the LCD when you're in the HiHat Pedal->LowLevel or HiHat Pedal->HighLevel of the Menu and when the pedal is fully closed?
6. What is the voltage on pin 38 when the pedal is fully open?
7. What "raw" value is shown on the LCD when you're in the HiHat Pedal->LowLevel or HiHat Pedal->HighLevel of the Menu and when the pedal is fully open?