PCB Inputs Jacks v1.8 for All In One PCB v2.8

[daddy4life85]

Read post after that, I got it working I had to change the impedance jumper and now it works perfect.

[Synthex]

Read post after that, I got it working I had to change the impedance jumper and now it works perfect.

Could you post the exact configuration for your HH pedal ?

[daddy4life85]

Sure no problem!

Pedal - Roland FD-8

Input jumpers are set to D position on your diagram.

The Impedance jumper is set to B according to your diagram.

Funny thing is I might be doing an optical controller now because I may have some new cymbals coming haha. But figured it was worth it to work out the problem and was trying to make sure nothing is wrong with my Megadrum build.

[Synthex]

I've updated the main first post.

[jeffbeckib]

Was the gerber file ever posted???

Synthex, could you also post the gerber files for this layout?

I will do it.

Where can these be bought?

Not yet available.

[thramul]

one short question, for the roland vh11 do I have to take the high or low impedance input?
https://www.megadrum.info/~megadrum/forums/viewtopic.php?f=3&t=255&start=0 elrules did some measurements here, got 20k ohm on pedal up.

[Synthex]

one short question, for the roland vh11 do I have to take the high or low impedance input?
elrules did some measurements here, got 20k ohm on pedal up.

low impedance input for 20kohm

[thramul]

thank you!

[CyberFly]

Me and my friend just started building a MegaDrum and are still looking for parts.
Is there anyone who could make us a two sets of these input PCBs?
If you could make us a set just sent me a PM.

Thanks in advance.

[gabriel1712]

I'll second that. Great work Synthex, but I had really difficulties getting the NYS215 sockets (2 month delivery on Mouser.com and others) and getting the PCB's done. I'll post my project shortly and how I did it 'ol school, without the PCB's (a shame since the PCB-mount is way better).

The Gerber-files is used for ordering PCB online, right? If someone publish this layout on a PCB-delivery company, please toss the link.

Did I btw miss the invaluable sticky thread about where to get part?