how are the pads made?
Posted: Sun Feb 10, 2008 11:17 pmhello
how are the pads made.i don't know how to bulid them
how are the pads made.i don't know how to bulid them
Page 1 of 2
Posted: Sun Feb 10, 2008 11:17 pmRe: how are the pads made?
Posted: Sun Feb 10, 2008 11:38 pmYou can find a lot of info about it at http://www.toontrack.com/forum/tt.aspx?forumid=52
Re: how are the pads made?
Posted: Mon Feb 11, 2008 9:48 am10q
Re: how are the pads made?
Posted: Mon Feb 11, 2008 5:24 pmFollow this tutorial. It is the best:
http://www.picturetrail.com/gallery/view?p=999&gid=9042765&uid=2981932&members=1
I made my edrum following it step by step. See my edrum here:
http://img517.imageshack.us/my.php?image=bateria0et1.jpg
http://www.picturetrail.com/gallery/view?p=999&gid=9042765&uid=2981932&members=1
I made my edrum following it step by step. See my edrum here:
http://img517.imageshack.us/my.php?image=bateria0et1.jpg
Re: how are the pads made?
Posted: Mon Feb 11, 2008 6:07 pmelrules wrote:I made my edrum following it step by step. See my edrum here:
http://img517.imageshack.us/my.php?image=bateria0et1.jpg
Very nice edrum !!
Re: how are the pads made?
Posted: Thu Feb 14, 2008 6:14 amthis thread at vdrums forum has TONS of links. enjoy. =)
http://www.vdrums.com/forum/showthread.php?t=21697
http://www.vdrums.com/forum/showthread.php?t=21697
Re: how are the pads made?
Posted: Thu Feb 14, 2008 5:51 pm10q i have some questions.
-i want to make the pads noiseless so nobody can hear me when the pc is off....
-can i do that?and i did not understand how to connect the hit-hat pedal...
-or how to mount the piezzo sensors on the pad electrically and i don't know if the sensors capture the mechanical impulse or the the sound of the pad
-can somebody give the schematics for connecting the sensors to the jacks
-i want to make the pads noiseless so nobody can hear me when the pc is off....
-can i do that?and i did not understand how to connect the hit-hat pedal...
-or how to mount the piezzo sensors on the pad electrically and i don't know if the sensors capture the mechanical impulse or the the sound of the pad
-can somebody give the schematics for connecting the sensors to the jacks
Re: how are the pads made?
Posted: Sat Feb 16, 2008 6:26 am10q i have some questions.
-i want to make the pads noiseless so nobody can hear me when the pc is off....
-can i do that?and i did not understand how to connect the hit-hat pedal...
-or how to mount the piezzo sensors on the pad electrically and i don't know if the sensors capture the mechanical impulse or the the sound of the pad
-can somebody give the schematics for connecting the sensors to the jacks
To minimize the noise of your pads, you will probably want to use mesh heads. You can make them yourself or you can buy them. To my knowledge, Roland mesh heads are the best for durability.
I have no idea as to how to connect the hihat pedal. I'll have to figure that out when I begin building it.
This is not the only way to make your pad, but many people have used it:
http://htmediaservices.com/modules/xoopsgallery/view_photo.php?xoops_imageid=142&set_albumName=album02&id=aar
And as for the wiring diagram, this is for a dual piezo (not to be mixed up with a piezo switch) pad:
http://edrum.for.free.fr/static/pictures/MBrolandwiring.gif
Re: how are the pads made?
Posted: Sat Feb 16, 2008 1:23 pmwhat that's rolland cone?
Re: how are the pads made?
Posted: Sat Feb 16, 2008 1:38 pmsynco wrote:what that's rolland cone?