I connected MD in USB for the first time and windows XP found new hardware. Megadrum at first, and then just USB audio device. After installing drivers, i got a message that hardware may not work correctly. I went to hardware/device manager and i found out that windows were scanning for new hardware continuously!!!! This loop stoped when i shut MD down.
Is this normal?
Continuously scan for new hardware...
5 posts
• Page 1 of 1
Continuously scan for new hardware...
by st3rgios » Fri Jul 09, 2010 1:40 pm
- st3rgios
- Posts: 8
- Joined: Mon Jun 16, 2008 9:39 pm
Re: Continuously scan for new hardware...
by dmitri » Fri Jul 09, 2010 1:55 pm
No, it is not normal.
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Continuously scan for new hardware...
by st3rgios » Fri Jul 09, 2010 2:03 pm
any ideas....what could be the problem?
The crystal (12MHz)?
D+ and D- are connected somewhere in the pcb?
up/down voltage?
The crystal (12MHz)?
D+ and D- are connected somewhere in the pcb?
up/down voltage?
- st3rgios
- Posts: 8
- Joined: Mon Jun 16, 2008 9:39 pm
Re: Continuously scan for new hardware...
by dmitri » Fri Jul 09, 2010 3:22 pm
Try another PC. Is it the same there?
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Continuously scan for new hardware...
by st3rgios » Fri Jul 09, 2010 10:56 pm
Problem solved... changed the crystal with a new one, and resoldered everything around the area of pic18f2550
- st3rgios
- Posts: 8
- Joined: Mon Jun 16, 2008 9:39 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 88 guests