Page 1 of 1
Continuously scan for new hardware...
Posted:
Fri Jul 09, 2010 1:40 pmby st3rgios
I connected MD in USB for the first time and windows XP found new hardware. Megadrum at first, and then just USB audio device. After installing drivers, i got a message that hardware may not work correctly. I went to hardware/device manager and i found out that windows were scanning for new hardware continuously!!!! This loop stoped when i shut MD down.
Is this normal?
Re: Continuously scan for new hardware...
Posted:
Fri Jul 09, 2010 1:55 pmby dmitri
No, it is not normal.
Re: Continuously scan for new hardware...
Posted:
Fri Jul 09, 2010 2:03 pmby st3rgios
any ideas....what could be the problem?
The crystal (12MHz)?
D+ and D- are connected somewhere in the pcb?
up/down voltage?
Re: Continuously scan for new hardware...
Posted:
Fri Jul 09, 2010 3:22 pmby dmitri
Try another PC. Is it the same there?
Re: Continuously scan for new hardware...
Posted:
Fri Jul 09, 2010 10:56 pmby st3rgios
Problem solved... changed the crystal with a new one, and resoldered everything around the area of pic18f2550