Page 1 of 2
kit in Hand
Posted:
Sat Feb 23, 2008 10:08 pmby jodev
Hello with all,
Houééé….
I received my kit, (two days) that was very quickly.
Large a Thank you with SYNTEX.
jodev
Re: kit in Hand
Posted:
Sat Feb 23, 2008 11:24 pmby Synthex
Great !!
I hope you will post pictures of your mounted kit !
Synthex
Re: kit in Hand
Posted:
Sun Feb 24, 2008 1:30 pmby jodev
Yes!
when it is ready, I will post it!
for the moment I miss only this blasted resistor : 6.2k
thank you.
jodev
Re: kit in Hand
Posted:
Sun Feb 24, 2008 1:36 pmby dmitri
jodev wrote:Yes!
for the moment I miss only this blasted resistor : 6.2k
Don't try to find it. You won't. Use two resistors connected serially, e.g. 4k7 and 1k5.
Re: kit in Hand
Posted:
Sun Feb 24, 2008 1:40 pmby Synthex
dmitri wrote:jodev wrote:Yes!
for the moment I miss only this blasted resistor : 6.2k
Don't try to find it. You won't. Use two resistors connected serially, e.g. 4k7 and 1k5.
It exists, I've got some !
Two questions
Posted:
Sun Feb 24, 2008 6:04 pmby jodev
Two questions;
1- my condenser 4.7µF is a polarized model, at the mass I put “+” or” - “?
2- is the component that I noted “component X” on the diagram, well the symbol of a potentiometer?
thank you.
jodev
Re: Two questions
Posted:
Sun Feb 24, 2008 7:17 pmby Synthex
jodev wrote:Two questions;
1- my condenser 4.7µF is a polarized model, at the mass I put “+” or” - “?
2- is the component that I noted “component X” on the diagram, well the symbol of a potentiometer?
thank you.
jodev
1) Yes, 4.7µF is a polarized model, at the ground you connect "-".
2) Yes, this is a potentiometer (10K ohms)
"Bon courage"
Re: kit in Hand
Posted:
Thu Feb 28, 2008 11:49 pmby jodev
Hello,
which format for poster photographs?
my photographs jpg too heavy and are rejected.
jodev
Re: kit in Hand
Posted:
Fri Feb 29, 2008 12:15 amby dmitri
The maximum size of attachments, including images, is 256kb. Try resizing images or use stronger jpeg compression.
Re: kit in Hand
Posted:
Fri Feb 29, 2008 12:45 amby jodev
Ok
jodev