Wich foam cone made?

[Maylord.war]

Hellò guys

i see in the web more foam cone to put to mesh head and the piezo, but are expensive!

Is possible built (home-made) a good cone with good response of sensivity and economic?

if it's possible i would like a pictures and the list of material required

sorry for my english

Thanks

[rockdude]

I recommend you to visit the forum of vdrums.com and it's DIY section. Make a search there and you will get lot's of info on the topic:
http://www.vdrums.com/forum/forumdisplay.php?f=48
Good luck!

[Maylord.war]

thanks!

and sorry you know a good place or site web for buy a good foam cone?

thanks

[einkahumor]

Here's one, you can get as many as you want from this guy. Only seems to sell them with the triggers on them though.

[Maylord.war]

very thanks!

[Maylord.war]

Has anyone tried these?

http://cgi.ebay.it/5-foam-cone-trigger- ... 3f01b16cde

[Ken Forgettable]

You can order (replacement) Roland cones at your local outlet for an equivalent price to those mentioned above.

[Model76]

Has anyone tried these?

http://cgi.ebay.it/5-foam-cone-trigger- ... 3f01b16cde

I am doing a DIY project with his "enhanced cones", and initial testing with a DTXTreme III has yielded very positive results. Build quality is excellent!

[Maylord.war]

hi!

very good! and what material you use?

if you have some pictures please post in this topic!

[Maylord.war]

You can order (replacement) Roland cones at your local outlet for an equivalent price to those mentioned above.

Hi ken Forgettable

I contacted the importer of Italian Roland

but told me that is possible buy only 2 cones because they are "special parts" intended only for service centers and not for users.

However, the price is 28 euros including shipping for only 2 cones of TD20 pad ... some solution?

The foam cone on ebay are good? what suggest?

very thanks and sorry for my english