Does it matter what type of resistors/capacitors I use?

[Faced_Wrist]

Hi there!

I'm thinking of building myself one Megadrum. But before I go about ordering everything i need, I have a few questions:
I have looked around this forum, but I feel my questions remain unanswered.

Does it matter whether I use carbon film resistors or metal film resistors? For example; Can I use only carbon film resistors?
And what about the rated output of the resistors, does that matter?

Does it matter what type of capacitors i use? Ceramic multilayer? Ceramic Disc? Tantalum electrolytic? Aluminum electrolytic?

Thanks in advance from Sweden!

[dmitri]

From http://www.google.co.uk/#sclient=psy&hl ... 3e231b710e :

viewtopic.php?f=3&t=991&start=0
viewtopic.php?f=3&t=1396

and so on.

[Firelord]

In addition to Dmitri's answer I also recommend familiarizing yourself with electronics theory basics and basic soldering/assembly. Maybe try and build some simple device. Otherwise it will be very hard for you to troubleshoot the assembly if something goes wrong.

[Faced_Wrist]

Dmitri: Thank you very much!

Firelord: I am an electrician, but my area of expertise is not in electronics.
Just not very familiar with what differs all types of resistors/capacitor etc.

Soldering will not be a problem.

Troubleshooting should not be a problem if needed.
I know electronics theory basics, and I have friends with greater experience should I fail to find my faults (if any)!


Thank you!

[CyberFly]

If you don't have much knowledge on electronics I would advice you to order a complete megadrum kit. This kit comes with all the parts and bits you need.
I don't know much about electronics and didn't order a complete kit. Researching every part before ordering it took me a long time and made the project difficult and boring. It's no fun when there is no progress in a project. Spare yourself the trouble and get the complete kit. This way your MegaDrum will be done in no time!

[jman 31]

If you don't have much knowledge on electronics I would advice you to order a complete megadrum kit. This kit comes with all the parts and bits you need.
I don't know much about electronics and didn't order a complete kit. Researching every part before ordering it took me a long time and made the project difficult and boring. It's no fun when there is no progress in a project. Spare yourself the trouble and get the complete kit. This way your MegaDrum will be done in no time!

I don't think you can get the complete kit any more. Synthex is only selling PCB's and IC's. The version 2.5 has a nice parts list put together by Gastric that was pretty easy to order from. I only noticed a couple of parts that were wrong on it.

[dmitri]

I don't think you can get the complete kit any more.

You can: viewtopic.php?f=3&t=1420

[jman 31]

Sorry Dmitri, I was talking about one that you had to order your own parts for. I really like your new board and all, but it takes a lot of the DIY out of it.

[Mane-eel]

Hi

I think that you can use both types of resistors and 1/4W is enough.

The capacitors are:
The two 22pF and two 15pF capacitors are "disk capacitors"
The one 470uF and two 1nF capacitors are normal "radial film capacitors"
And the others are "normal radial ceramic capacitors"

Bye Mane