Need help with the stereo jacks placing

[slayer666]

Hi. I'm very close to completing my kit and the only thing left for me to do is decide in which order I should place my input jacks.
I'm gonna have 2 PCB's, 1 ontop of the other resulting in 2 rows of jacks.

All jacks are of course stereo.

Take a look at the picture attached and give me some feedback please. jacks viewed from the back of the megadrum

If you have an idea, please post it here, I need help.

Thank you in advance.

[Synthex]

Here is my implentation (Viewed from the rear) :

MegaDrum32 Box Bottom Low.jpg

Aux7---Aux5---Aux3---Aux1---Crash---HiHat---Tom3---Tom1---Snare
---------Aux6---Aux4---Aux2----Ride---Pedal----Tom4---Tom2---Kick

Synthex

[Synthex]

Yamaha_DTXPIII_Rear.jpg

Roland_td20b_Rear.jpg

Roland_td12_Rear.jpg

[slayer666]

Thanx Synthex.

is rim/edge ring on jack?

[slayer666]

Here is my implentation (Viewed from the rear) :

MegaDrum32 Box Bottom Low.jpg

Aux7---Aux5---Aux3---Aux1---Crash---HiHat---Tom3---Tom1---Snare
---------Aux6---Aux4---Aux2----Ride---Pedal----Tom4---Tom2---Kick

Synthex

I think I'll go with your jack placing.

[Synthex]

Thanx Synthex.

is rim/edge ring on jack?

Yes

[slayer666]

I made a word document making it easier to put the inputs in relation to the jacks.
I used your setup as a template.

[Synthex]

I made a word document making it easier to put the inputs in relation to the jacks.
I used your setup as a template.

Good work Slayer666 !
I will add it to the documentation.
Thanks.

[slayer666]

I made a word document making it easier to put the inputs in relation to the jacks.
I used your setup as a template.

Good work Slayer666 !
I will add it to the documentation.
Thanks.

I'm glad you liked it!!

[dcho]

It'll definitely help simplify understanding the wiring for a lot of us. =) thanks man