Cabling question

[josselin]

Hello Dmitri & co,

I'm still thinking about building your 56 triggers Megadrum.
I donwloaded all the useful pdf information and pictures.

Would you have some pictures to show the way you connect the two soldered
cable of triggers to jacks (the pads connexion 1 & 2).
What material is relevant to pass from micro-cables to big standard audio jacks ?

Thanks.
Cheers.

Didier.

[dmitri]

I don't have pictures at hand but you can see the cabling used my me in viewtopic.php?f=3&t=1420

[josselin]

Thank you.

I already had a look on this page.
I was speaking about the output cabling to the jacks, not the connections to the board (which is provided in the kits).

Thanks.

Didier.

[josselin]

I saw also the examples of Megadrums on you site but I would like to have your advice on which material is much appropriate.
Thanks.

[dmitri]

Thank you.

I already had a look on this page.
I was speaking about the output cabling to the jacks, not the connections to the board (which is provided in the kits).

You can see 2 wide flat cables there. These are directly soldered to input jacks - no magic.