Page 1 of 1
June firmware problem
Posted:
Sat Jun 25, 2011 2:49 pmby Ramsh
As I posted after finishing the update and turning it off and on again the megadrum still shows 24mhz but it should be 20mhz. I got this problem with the last two firmwares 20110621 and 20110602
I also got the last version of the manager but after I open the midi port it doesn't show the firmware version. Midi doesn't work then as well.
Re: June firmware problem
Posted:
Sat Jun 25, 2011 2:54 pmby dmitri
Is it still 24MHz if you load the firmware from
viewtopic.php?f=3&t=1630 ?
Re: June firmware problem
Posted:
Sat Jun 25, 2011 2:56 pmby Ramsh
No I'll try it next, thanks.
Re: June firmware problem
Posted:
Sat Jun 25, 2011 3:10 pmby dmitri
If it is still 24MHz, load this firmware:
megadrum644_56_20110625.zip
and tell me the number it shows on the first screen of the menu after power cycling and entering the menu.
Re: June firmware problem
Posted:
Sat Jun 25, 2011 4:45 pmby Ramsh
I'll try this one, my last firmware was from February. Besides it's the same problem with the 20110623.
Re: June firmware problem
Posted:
Sat Jun 25, 2011 5:15 pmby Ramsh
After the update it showed 5793, after rebooting always 5799.
Re: June firmware problem
Posted:
Sat Jun 25, 2011 6:33 pmby dmitri
Try this one:
megadrum644_56_20110625.zip
Re: June firmware problem
Posted:
Sun Jun 26, 2011 6:03 pmby Ramsh
Thanks it works again, but still it doesn't show the firmware version in the manager. However, at least it works again.
Re: June firmware problem
Posted:
Sun Jun 26, 2011 6:35 pmby dmitri
Ramsh wrote:Thanks it works again, but still it doesn't show the firmware version in the manager. However, at least it works again.
Check MDM MIDI ports configuration.