Blank Atmega?

Discussions related to MegaDrum Hardware

Blank Atmega?

Postby zero098 » Fri Oct 14, 2011 5:48 pm

Hey everyone,
Just received my new Atmega from Dmitri, and when I swapped it with my old unencrypted bootloader version in my Synthex v2.7 board, The top row of my LCD only displays blocks.
MDLCD1.jpg

From what I've determined, this is usaully caused by an Atemga that isn't programmed. Is there anything I'm missing? I put the old Atmega back in place to verify that everything is still working and all appears well. Could something else be wrong, or is this simply a case of a bad or unprogrammed atmega?
You do not have the required permissions to view the files attached to this post.
zero098
 
Posts: 4
Joined: Sat Mar 22, 2008 10:12 pm

Re: Blank Atmega?

Postby dmitri » Fri Oct 14, 2011 6:10 pm

All Atemga's I send come from me programmed with protected bootloader and loaded with latest firmware version. 100%.

From: MegaDrum FAQ. Read it before posting in this forum!
7. Having LCD problems? Read this topic
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Blank Atmega?

Postby zero098 » Fri Oct 14, 2011 7:56 pm

Thanks for the link. Checked voltage on pin 3, its at .9v, and pin 2 is at 5v. This is one of the older boards with a pot to control the contrast. Do I need to make modifications to the board to accommodate the new firmware? Once again, I put the old atmega in place, and the lcd functioned with no issues, so it looks like the LCD is fine. Also, if the Atmega is functioning properly, shouldn't the bootloader load up and at least light up the midi LED?
mdlcd2.jpg
You do not have the required permissions to view the files attached to this post.
zero098
 
Posts: 4
Joined: Sat Mar 22, 2008 10:12 pm

Re: Blank Atmega?

Postby dmitri » Fri Oct 14, 2011 9:48 pm

zero098 wrote:Thanks for the link. Checked voltage on pin 3, its at .9v, and pin 2 is at 5v. This is one of the older boards with a pot to control the contrast. Do I need to make modifications to the board to accommodate the new firmware?

No modification needed.

Once again, I put the old atmega in place, and the lcd functioned with no issues, so it looks like the LCD is fine.
Also, if the At mega is functioning properly, shouldn't the bootloader load up and at least light up the midi LED?

Only if the LEFT button is pressed when powering up. Otherwise MegaDrum firmware must load.
If the board is fine I can only suspect that Atmega is damaged.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 125 guests