www.megadrum.info

I got my module back after reprogramming for encrypted firmware, thank you very much Dmitri!

I was setting up my high-hat yesterday and discovered that LevelsAuto doesn't respond as described in the documentation. I have an unmodified Roland FD-8 pedal.

Default when I turn on the module is Low=16 High=50 and nothing changes after pressing and releasing the pedal several times. If I set LowLevel to 90 and press the pedal a few times it resets to 40, but if I set it below 40 it doesn't adjust up and I wondered if that behaviour was normal? Highlevel doesn't move no matter where it is set initially.

I think I remember it working as described in the documentation with the (very old) previous firmware, but I can't be certain.

Sabre wrote:I got my module back after reprogramming for encrypted firmware, thank you very much Dmitri!

I was setting up my high-hat yesterday and discovered that LevelsAuto doesn't respond as described in the documentation. I have an unmodified Roland FD-8 pedal.

Default when I turn on the module is Low=16 High=50 and nothing changes after pressing and releasing the pedal several times. If I set LowLevel to 90 and press the pedal a few times it resets to 40, but if I set it below 40 it doesn't adjust up and I wondered if that behaviour was normal?

Yes. LevelsAuto can adjust LowLevel only down and HihgLevel only up.

Highlevel doesn't move no matter where it is set initially.

Even if you set it to 16?

Also see https://www.google.co.uk/#hl=en&sclient ... forums+fd8

It works just fine when I set the pedal impedance switch correctly to the high impedance (down) setting, and AltIn to 'Yes'.

Thank you for linking me to the FD-8 search results Dmitri. Reviewing those threads helped a lot.