Sample pad with different MIDI-notes

Discussions related to MegaDrum Hardware

Sample pad with different MIDI-notes

Postby drummertobi » Mon Jun 11, 2012 2:34 pm

Hi MEGA-Drum comunity.

I tried to build up a MD-sample pad with 11 pads. The plan is to connect the pad via midi to my TD-12 Roland module to play percussion sounds. See picture (I can post more pictures if everything works):

A huge problem I have is that I receive not the sound (midi notes) I expect. I connect the MD also to MIDI-OX (software) and there I also receive different midi notes.

Facts:
First I set all the midi notes in my MD to “1” by using MD- Manger
For the selected pad (single-pad) I set the note to “7”

If I hit the piezo at the part inside (silver) I receive note “7” in MIDI-OX
If I hit the piezo at the part outside (golden ring) I receive note “1” in MIDI-OX
If I hit on the rim on my wooden pad (by using a drum stick) I receive note “33” in MIDI-OX?

I think it’s not because of the crosstalk settings because this happens also with a piezo witch is not on the board. I released one piezo and there I have the same problem.

Is it because of wrong soldering? The two pads on the right side (bottom) are configured as Rim and Head in MD. But in the MD-Manager one Pad has note “7” and the other has note “8”. By hitting the part inside I receive note “7” and “8” and by hitting the silver piezo ring I receive note “1”. So the two pads are separate.

Where is the Problem? Could anybody help me? Thank you. Tobias.
You do not have the required permissions to view the files attached to this post.
drummertobi
 
Posts: 6
Joined: Thu Apr 28, 2011 7:53 pm

Re: Sample pad with different MIDI-notes

Postby dmitri » Mon Jun 11, 2012 5:35 pm

Start with connecting one pad/piezo at a time.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Majestic-12 [Bot] and 47 guests