3 different notes on Snare ?
Posted: Wed Jun 13, 2012 5:29 pm
Hello,
Now the whole kit works perfectly with a basic setup I try to configure the snare to get 3 sounds :
1. Open hit : hitting the mesh head
2. Sidestick : hitting the side (reggae style)
3. Rim shot : hitting both the mesh head and side at the same time
I've added a second piezzo for the rim, on the ring of the jack.
Both piezzo have the same GND on the jack's sleeve.
I can actually get only 2 sounds
The normal open hit sound is ok.
Then the only other midi note going out from the megadrum is from "DBNote". According to the configuration manual, the note would be active "when the rim/edge switch is pressed", so this should be my rimshot.
I'm not able to send the midi note from "BNote"....
So, can someone tell me if this is possible to have three different sounds, and if it is possible with 2 piezzo ?
thanks!
Now the whole kit works perfectly with a basic setup I try to configure the snare to get 3 sounds :
1. Open hit : hitting the mesh head
2. Sidestick : hitting the side (reggae style)
3. Rim shot : hitting both the mesh head and side at the same time
I've added a second piezzo for the rim, on the ring of the jack.
Both piezzo have the same GND on the jack's sleeve.
I can actually get only 2 sounds
The normal open hit sound is ok.
Then the only other midi note going out from the megadrum is from "DBNote". According to the configuration manual, the note would be active "when the rim/edge switch is pressed", so this should be my rimshot.
I'm not able to send the midi note from "BNote"....
So, can someone tell me if this is possible to have three different sounds, and if it is possible with 2 piezzo ?
thanks!