www.megadrum.info

hi dimitri I am Manuel from Venezuela, I'm doing 32 megadrum imput, I can replace the BAT85 to BAT46?? I already did the two cards, I hit the sensor but generates no response... and another situation, neither manager detects the megadrum. I use de last firmware free

manuelnava5000 wrote:hi dimitri I am Manuel from Venezuela, I'm doing 32 megadrum imput, I can replace the BAT85 to BAT46??

I never tried so I don't know.

I already did the two cards, I hit the sensor but generates no response... and another situation, neither manager detects the megadrum. I use de last firmware free

1. Bad PCB.
2. Bad soldering.
3. Bad cabling.
4. Incorrect firmware programming.
5. MegaDrum Manager will not work with old firmware correctly.

Hi
usually the BAT46 should work, the only difference is the higher reverse voltage (100V vs. 30V). It is a little bit oversized. The forward voltage is nearly the same, while the forward current is slightly higher, what should not matter. Regarding the speed (trr) there was nothing written in the datasheet.