Page 1 of 3
how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 9:58 pmby marzsaid
hi ,
i need help please i cant get to configur my pedal control ( alesis DM6), anyone have a file to load it in my MDS, or can expliq me how to do ?
thanks
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 10:05 pmby dmitri
Did you read everything in
http://www.megadrum.info/content/hihat-pedal-settings and in particular about LevelsAuto, LowLevel and HiLevel?
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 11:06 pmby marzsaid
yes
all input are good and i get the senial but the control pedal no, i use the mono jack
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 11:19 pmby dmitri
1. How did you configure LowLevel and HiLevel?
2. What did you do with LevelsAuto after you configured LowLevel and HiLevel?
3. When you're in LowLevel and press the pedal what value (raw level) do you see in the top row of the LCD?
4. When you're in LowLevel and deperess (release) the pedal what value (raw level) do you see in the top row of the LCD?
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 11:34 pmby marzsaid
1 i put 300 in low an HI livel but i get erros message, i hve now 19 in low and 300 in hilevel
2 autolevel : yes
3 when i press pedal i have 3
4 when i relase pedale i hve numbers betwin 6 9 and 12
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 11:51 pmby dmitri
1. The pedal impedance switch (the right switch on the front panel) has 3 positions. What position did you set this switch to?
2. What did you set AltIn to?
Re: how to configur hit hat pedal alesis DM6
Posted:
Sat Jan 12, 2013 11:58 pmby marzsaid
1 first position
2 no
Re: how to configur hit hat pedal alesis DM6
Posted:
Sun Jan 13, 2013 12:01 amby dmitri
marzsaid wrote:1 first position
Is "first position" bottom, middle or top?
Re: how to configur hit hat pedal alesis DM6
Posted:
Sun Jan 13, 2013 12:07 amby marzsaid
a top
Re: how to configur hit hat pedal alesis DM6
Posted:
Sun Jan 13, 2013 12:17 amby dmitri
1. Disconnect the pedal.
2. Go to LowLevel.
What value do you see in the top LCD row?