CC 4
Posted: Sat Jan 25, 2014 10:58 amI'm getting this on the midi log. Any ideas?
Page 1 of 1
Posted: Sat Jan 25, 2014 10:58 amRe: CC 4
Posted: Sat Jan 25, 2014 11:26 amIn http://www.megadrum.info/content/hihat-pedal-settings see "Next screen HiHat Pedal->CC Value:"
Re: CC 4
Posted: Sat Jan 25, 2014 11:43 amAnything else I need to look at?
Hi hat is set at input 50, and disabled (midi note 0)
Disabled all the notes in the hi hat settings, pot (from the drop down)
cheers
Hi hat is set at input 50, and disabled (midi note 0)
Disabled all the notes in the hi hat settings, pot (from the drop down)
cheers
Re: CC 4
Posted: Sun Jan 26, 2014 12:34 amDisabling a HiHat cymbal doesn't disable a HiHat pedal.
Are you saying that you set HiHat Pedal->Type to Pot and it still sends CC messages? Post you HiHat Pedal settings screenshot along with Raw MIDI Log showing CC 4 messages.
Are you saying that you set HiHat Pedal->Type to Pot and it still sends CC messages? Post you HiHat Pedal settings screenshot along with Raw MIDI Log showing CC 4 messages.
Re: CC 4
Posted: Sun Jan 26, 2014 9:42 amJust to be clear that I have no physical Hihat nor have I wired anything related to it.
Re: CC 4
Posted: Sun Jan 26, 2014 9:46 amThe raw midi is, as above. Every pad and cymbal is affected no matter the midi channel.
Re: CC 4
Posted: Sun Jan 26, 2014 11:23 amSet LowLevel to 1022, HighLevel to 1023. Connect HiHat pedal input to ground. Take a picture of the LCD showing HiHat Type.
Re: CC 4
Posted: Sun Jan 26, 2014 12:49 pmdmitri wrote: Connect HiHat pedal input to ground.
Is this pin 38 or 39 Dmitri, you are referring to?
Re: CC 4
Posted: Sun Jan 26, 2014 12:56 pmOK solved.
It has nothing to do with the hi hat, its the cc message for triggered in.
It has nothing to do with the hi hat, its the cc message for triggered in.
Re: CC 4
Posted: Sun Jan 26, 2014 1:05 pmIndeed! How could I have forgotten this?:)