Page 1 of 1
blank blue screen
Posted:
Mon Aug 17, 2015 5:51 pmby Hidingsecretlife2
just or ordered a full kit and connected all the inputs, when i fire it up all i get is a blank blue screen. i tried updating the firmware w/ MDM still nothing. MDM sees the midi inputs, but shows 0% when trying to update firmware.. please help.. very sad
Re: blank blue screen
Posted:
Mon Aug 17, 2015 6:14 pmby dmitri
All modules/kits come with the latest firmware version loaded. You ordered in June so your kit has with the latest version and no reason to update.
You ordered the Minimal kit, which means it comes without any external components like cabes, LCD, controls and etc. As such I suspect that you didn't wire some of the cables correctly. Most likely LCD is not wired correctly or it is faulty. I would suggest to doble/triple check it (and all other wirings). With wiring correct and good LCD it just works.
Re: blank blue screen
Posted:
Mon Aug 17, 2015 6:23 pmby Hidingsecretlife2
thanks for the quick response! i'll triple check everything, but i did end up ordering the full kit, so the lcd and cables came with it
Re: blank blue screen
Posted:
Mon Aug 17, 2015 6:27 pmby Hidingsecretlife2
i got it!! it appears a tiny bit a solder was shorting to contacts on the lcd board. i'm embarrassed. thanks again!