www.megadrum.info

Hello
How can I make a precise measurement of the waveform without oscilloscope ?
I thought my sensors connect directly to my sound card and use cubase .

Here's what I get:
1-4 : moderate strokes
5 to 8: weak moves
9-12 : When I drop the baton from a height of 15 cm, with the rebound.

The blue area is 1 ms .

Are these good signals?

Looks alright provided the signal levels follow hits strength closely.

when I listen in cubase it really detects the shot with good sensitivity ,
I will try to find the right setting , it's for my snare .
my minscan not be well chosen.

Step 1 : I assign a "note" corresponding to the center in superior drummer (A0) and a "note" for the rimshot (E1).
Step 2 : I gradually increased the threshold to remove false hits. ( 40 head and 42 to the rim).
Step 3 : I check auto lvl and I hit hard 10 times the snare.
I see a midi output to notes 33 and 40 while I did not hit on the head.
Step 4 : I remove self lvl and I fixed highlvl 470.
Step 5 : I am 10 sidestick for trimming the HighLevel Rim.
Step 6 : I remove auto lvl and I fixed highlvl 300.
Step 7 : ...


After I 'm confused,... By the signals measured in cubase , i try to set the minscan , dynlvl and timelvl , but I can not get a good result.

You have to set it to "dual or 3way yamaha" instead of "single piezo" at the bottom of the 'head' menu.

ah yes , I forgot
it is done.