Page 1 of 2
Zendrum inspired controller finished
Posted:
Wed May 29, 2019 9:31 amby Rasmus
Hello, just wanted to show my new padcontroller.
The pads are 50mm highly sensitive with great seperation.
Pads are 3d printed and if anyone is interested I can provide the stl files.
The piezo used are 35mm and the foam in the pads is 20mm very dense machine dampening foam.
Best Regards Rasmus
Re: Zendrum inspired controller finished
Posted:
Wed May 29, 2019 11:32 amby airflamesred
Looks great, what are the dimensions.
Re: Zendrum inspired controller finished
Posted:
Wed May 29, 2019 12:39 pmby Rasmus
hello .... 40 x 48 x 7 cm.
Its Quite heavy because of the MDF board ... it improve the crosstalk between pads..
Rasmus
Re: Zendrum inspired controller finished
Posted:
Wed May 29, 2019 3:54 pmby ignotus
Video!
Re: Zendrum inspired controller finished
Posted:
Wed May 29, 2019 4:20 pmby Rasmus
Ok .. how do I share a video best here , can I use dropbox ?
Rasmus
Re: Zendrum inspired controller finished
Posted:
Wed May 29, 2019 4:33 pmby airflamesred
Rasmus wrote:Ok .. how do I share a video best here , can I use dropbox ?
Rasmus
Youtube Sir. the world needs to see this.
Re: Zendrum inspired controller finished
Posted:
Thu May 30, 2019 3:01 pmby Rasmus
Hello, here is a little video clip .. there is a little latenzy on the sound .. but in real life it is very short
https://youtu.be/e_GO2h_jNRoRasmus
Re: Zendrum inspired controller finished
Posted:
Thu May 30, 2019 3:48 pmby airflamesred
Great, where are the sounds from?
I've seen these before with them laid out with one under each fingertip
Re: Zendrum inspired controller finished
Posted:
Thu May 30, 2019 3:50 pmby Rasmus
Hi ... the sounds are superior 3 with roots sticks library
here is one more clip
https://youtu.be/N6MsxotHwPI
Re: Zendrum inspired controller finished
Posted:
Sat Jun 01, 2019 11:43 amby Rasmus
Now with foldable stand
