Page 1 of 1
6" Dauz pad from 90's not registering hits
Posted:
Thu Jun 27, 2019 2:49 amby dsteinschneider
I have two 6 inch Dauz pads from my old D4 based setup I used in the 90's. I wanted to use them as cymbal triggers until I build DIY ones. The first one I plugged in didn't register so I thought perhaps it was a broken one but then I found a second one I had put in a box and I know it worked before. It also doesn't send hits so perhaps I have to reverse polarity or make some other adjustment for them to trigger hits?
Thanks,
Re: 6" Dauz pad from 90's not registering hits
Posted:
Tue Jul 02, 2019 1:05 pmby airflamesred
If its single zone then the polarity shouldn't matter.
Re: 6" Dauz pad from 90's not registering hits
Posted:
Mon Aug 05, 2019 3:06 pmby dsteinschneider
What steps are recommended for me to troubleshoot my two Dauz 6" pads from the 90's that aren't triggering? I have a multimeter.
Thanks,
Re: 6" Dauz pad from 90's not registering hits
Posted:
Thu Aug 08, 2019 1:04 pmby dmitri
I don't think you can troubleshoot a piezo with a multimeter.
Re: 6" Dauz pad from 90's not registering hits
Posted:
Wed Aug 21, 2019 1:55 pmby dsteinschneider
I've replaced the Dauz pads with Pintech practice cymbals with a prewired 35mm piezo I bought on Amazon from Goedrum affixed underneath. They work really well for single zone crash and splash