Page 1 of 1

Fired up Megadrum and it's dead?

PostPosted: Sun Mar 22, 2020 1:20 pm
by GreasyBumpkin
What's going on? I've rebooted it three times... Nothing...

I'm stuck inside with the fucking Corona virus and it seems like my module has gotten sick too.

Re: Fired up Megadrum and it's dead?

PostPosted: Sun Mar 22, 2020 5:07 pm
by dmitri
Boot it with default settings - RIGHT switch pressed while powering up.

Re: Fired up Megadrum and it's dead?

PostPosted: Thu Mar 26, 2020 3:46 pm
by GreasyBumpkin
dmitri wrote:Boot it with default settings - RIGHT switch pressed while powering up.


this didn't resolve it. The module is completely unusable every time it's booted up, I have to load the editor, then detect the module and send my config file to the module, and it may or may not be usable, sometimes it sends MIDI but the display is faulty.

the module is about 2 years old now, is this expected with age? it's well looked after, no gigs.

Re: Fired up Megadrum and it's dead?

PostPosted: Thu Mar 26, 2020 6:48 pm
by dmitri
So, what does it show on the LCD when you boot with the RIGHT switch pressed?
What is MCU type? What is the firmware version?