www.megadrum.info

Hi,

my MD is working very well.

I only have the problem of not being able to save the Autoload Conf=yes configuration.
Every time I set Autoload Conf = Yes, at next boot the MD does not load the last loaded/saved configuration.
Moreover, navigating the menu, I always find Autoload Conf = No.

What is the correct sequence for setting the MD so that it ALWAYS loads, for example, configuration 1?

Thanks

LastShaman

1. Save configuration you want to auto load on powering up.
2. Set AutoLoad to Yes. Wait until it exits the menu back to the VU meters. This setting is only saved after exiting the menu.
3. Now power cycle your MegaDrum. It should now auto load the last saved configuration and you should see AutoLoad set to Yes.