atmega32 not detected in ponyporg

[ubaid88]

Well previously Dmitri said

Second, when USB is and ISP cables are connected, measure voltage between pins 11 and 10 of Atmega. If it is +5

My voltage +2 - +2.5 what could be problem

[dmitri]

Well previously Dmitri said

Second, when USB is and ISP cables are connected, measure voltage between pins 11 and 10 of Atmega. If it is +5

My voltage +2 - +2.5 what could be problem

You either have broken connectivity from +5 on USB to pin 10 or broken connectivity from ground on USB to pin 11.