Another problem regarding vu meters.
Posted:
Sat Mar 28, 2009 11:02 pmby ubaid88
Ok iam having a new problem regarding analogue board. I have still not connected anything to pad connector 20x2.
But iam getting continuous midi activity to full level in first 4 channels of both first row and second row, on lcd screen, if i connect my analogue pcb with digital. Otherwise every thing fine with digital pcb.
Re: Another problem regarding vu meters.
Posted:
Sat Mar 28, 2009 11:57 pmby dmitri
There is probably a short/break or a loose connection around the first 4051.
Re: Another problem regarding vu meters.
Posted:
Sun Mar 29, 2009 12:15 amby ubaid88
dmitri wrote:There is probably a short/break or a loose connection around the first 4051.
Solved.
Again bad wiring to digital board. Sorry for that.
But there is strange thing if i touch metal part of diodes. Then i see midi signal.
Re: Another problem regarding vu meters.
Posted:
Sun Mar 29, 2009 12:21 amby dmitri
ubaid88 wrote:dmitri wrote:There is probably a short/break or a loose connection around the first 4051.
Solved.
Again bad wiring to digital board. Sorry for that.
But there is strange thing if i touch metal part of diodes. Then i see midi signal.
This is normal, your body induces electrical noise/signals. Actually this is how it may be tested without attaching piezos.