Page 1 of 1
Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 1:15 amby Cysign
Hi,
i currently bought a Roland TD-12. But I need more Inputs.
I jast was thinking of buying a Alesis Trigger I/0...but now I'd like to know how difficult it is to build my own MegaDrum with Midi-Out and USB-Out, fully compatible to computer AND td-12.
Is there anybody who could halp me with problems? Is there anybody who build his own MD and who speaks German?
I'm no electrician...but I'd like to build my own MegaDrum.
How expensive would it be all together (exapt the case...) ?
Best Regards,
Cysign
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 1:39 amby userfriendly
It's not difficult to build it if you're not completely inept with a soldering iron.
Message me privately or start a thread in the "other languages" section of the forum, and we can switch to German.
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 2:34 pmby Cysign
sonud's great
do I need somthing else exapt
Kit 3 : The new PCB v2.8 + PCB Components + Displays + Buttons (105 euros)
a case to plug the components in
?
Are the 1/4" sockets includet?
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 3:41 pmby jman 31
You will have to provide your own 1/4" jacks and the enclosure. Other than that I think Synthex's kit is pretty complete.
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 3:54 pmby userfriendly
I needed also an On&Off switch.
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 5:12 pmby Cysign
what about the powersupply? I'd like to use it as stand-alone trigger-to-usb and as midi-extension für my TD-12, then I need a 5V adaptor? or does only work one powerconnection?
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 6:16 pmby userfriendly
You're only going need a power supply if you don't connect the USB port.
Re: Megadrum as input-extension for TD-12??
Posted:
Sun May 31, 2009 6:17 pmby Synthex
Cysign wrote:what about the powersupply? I'd like to use it as stand-alone trigger-to-usb and as midi-extension für my TD-12, then I need a 5V adaptor? or does only work one powerconnection?
If you use my kit, a 5V regulator in included on PCB.
When you don't use the USB, you can use a power supply from 7V to 12V.