MegaDrum Manager

[dmitri]

Level are all zero, notes are set like 8 for bow and 7 for edge (CC variable notes).

I the config you posted all notes are 0. At least LowLevel and HighLevel must not be both 0.

Update: Correct me if I'm wrong but with cc4 we set up pedal in VST not in MD right?

Yes.

[dmitri]

Are you still getting this problem if you start with the default config, i.e. with AutoLoad Conf set to No?

And what about this?

[privatex]

Look Dmitri I messed up something when I saved configuration for upload here so that is not what I use, I described how I set up pedal. Hi and low levels are all right but in that configuration as I said it wasn't saved for some reason.
''No pedal menu never work for me, not now, not in the past no matter what I do .''...even if I load default settings. In the future I'm gonna use quote option no problem.
This is mystery for now. I'm gonna upload firmware, MDM, and configuration file (from my hard drive) which are in use right now.

https://www.dropbox.com/s/it6ok1uix0j8x ... s.zip?dl=0

[dmitri]

Can you try on another PC?

[dmitri]

All zeros, except hhInput, in your last config:

Code: Select all

#Pedal settings
pedal.type = false
pedal.new_algorithm = false
pedal.autoLevels = false
pedal.altIn = false
pedal.reverseLevels = false
pedal.curve = 0
pedal.chickDelay = 0
pedal.cc = 0
pedal.ccRdcLvl = 0
pedal.lowLevel = 0
pedal.highLevel = 0
pedal.openLevel = 0
pedal.closedLevel = 0
pedal.shortThres = 0
pedal.longThres = 0
pedal.chickThres = 0
pedal.hhInput = 2
pedal.softChicks = false
pedal.semiOpenLevel = 0
pedal.halfOpenLevel = 0
pedal.chickCurve = 0
pedal.chickPeriodShort = 0
pedal.chickPeriodLong = 0
pedal.chickPeriodDead = 0
pedal.bowSemiOpenNote = 0
pedal.edgeSemiOpenNote = 0
pedal.bellSemiOpenNote = 0
pedal.bowHalfOpenNote = 0
pedal.edgeHalfOpenNote = 0
pedal.bellHalfOpenNote = 0
pedal.bowSemiClosedNote = 0
pedal.edgeSemiClosedNote = 0
pedal.bellSemiClosedNote = 0
pedal.bowClosedNote = 0
pedal.edgeClosedNote = 0
pedal.bellClosedNote = 0
pedal.chickNote = 0
pedal.splashNote = 0


[privatex]

I feel silly. MD with my sisters laptop work perfect and everything is fine. I don't know what's happened there, any clue!?

Update: I think I found solution of this problem. This is a screenshot from one topic with conversation between you and angr77 about same MDM problem I think.

[angr77]

Yeah, that's right, on some computers using the ATMega 1284...it was almost impossible read or store hihat info without using a powered USB hub.

This totally disappeared with the ARM based MegaDRUM devices....it also disappeared in my memory.

Angr77

[angr77]

One function which I am missing is the function to be able to set the autohighlevel (measuring the piezo high level) - directly in MDM. This can't be done from MDM. Today you need to have buttons to be able run that sequence. If this function is offered in MDM...you are almost able to do 100% of the tasks from MDM.

[dmitri]

One function which I am missing is the function to be able to set the autohighlevel (measuring the piezo high level) - directly in MDM. This can't be done from MDM. Today you need to have buttons to be able run that sequence. If this function is offered in MDM...you are almost able to do 100% of the tasks from MDM.

I'm a bit confused about this. You can check HighLevel Auto, set HighLevel to 64 and then hit the pad hard many times until HighLevel stops changing (if you have the latest firmware version). After that just uncheck HighLevel Auto again. Isn't this what you're asking for?

[angr77]

hmm...sure? Did you really do it from MDM? Great if this works!

Best Regards

Anders