Page 1 of 1
MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 6:53 pmby ole_hansen
why does my MD all of a sudden send out that midi note?
it's jut a constant stream of c#3's going out.
i've tried unplugging all the 32 inputs. and it still keeps sending that note.
i've tried updating the FW - still the same.
any idea?
and why just that note?
i hadn't even hooked that cable (cable 13 from the input list) up to anything yet.
help please?
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 7:27 pmby ole_hansen
oh and there are no shorts between the input cables/pins and the IC's.
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 7:41 pmby ole_hansen
hmmm
i just took out the first 2 IC's and switched them around.
the second one (controlling inputs 9-16 - correct if wrong) was kind of warm. warmer than the others.
after switching them around, it's backto my normal working MD...
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 7:48 pmby ole_hansen
actually it's not back to working.
well the IC (second one) is fried for some reason.
i know because after swapping the 2 IC's the HiHat controller wasn't working anymore - constantly peaking at 127 and sending out midi.
i guess i can just go out and by a new one, right?
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 10:04 pmby dmitri
Looks like the IC is faulty.
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Thu Aug 27, 2009 11:39 pmby Ken Forgettable
Any idea why it may have popped?
Re: MD sending C#3(49) (stock crashB) all the time... ???
Posted:
Fri Aug 28, 2009 12:03 amby ole_hansen
nope