Issue with Millenium Hihat Pedal

[dmitri]

With switch up: Depressed 303-304 Pressed 204
With Switch Down: Depressed 214 Pressed 216

1. Set the impedance switch to up.
2. Set AutoLevels to No
3. Set LowLevel to 215.
4. Set HighLevel to 290.
Does the pedal VU meter now goes down and up when you press and depress the pedal?

[danifc]

When it pressed the VU goes down and when it,s depressed the VU goes up and it stays up forever

[danifc]

I have tested with superior drummer and it works,it sounds my god!
A thing curious,when the pedal is depressed,i have rimshot in the hihat,but when its pressed no sound of rim.

[dmitri]

When it pressed the VU goes down and when it,s depressed the VU goes up and it stays up forever

That is right. As long as the pedal is depressed the pedla VU meter will stay up. Revert to the the official firmware and use the Low/HighLevel settings we have found.

[danifc]

Thanks very Much Dmitri,Then i must put this values in the hi hat pedal to work...
Can i load the last firmware not the test one and test it?

[dmitri]

I have tested with superior drummer and it works,it sounds my god!
A thing curious,when the pedal is depressed,i have rimshot in the hihat,but when its pressed no sound of rim.

Default pedal notes for half/closed positions and superior drummer mapping mismatch? What does MIDI-OX show when you hit the rim with the pedal pressed and depressed?

[dmitri]

Shall we consider this issue resolved before going to another topic?

[danifc]

In which menu of midi-ox can see that?
P.D: I get the rim sound when the pedal is depressed but when it,s depressed no rim only head sound

[dmitri]

In which menu of midi-ox can see that?
P.D: I get the rim sound when the pedal is pressed but when it,s pressed no rim only head sound

In the main MIDI-OX window.

[danifc]

I have the main window open and when i hit a pad nothing happens in the black window