Firmware version to test

[dmitri]

Hi,

I post here a firmware version which has a substantially modified algorithm for sampling input signals. In short it does a kind of "caching" for choosing inputs to sample.
Also this version introduces a new setting per each input: MinScan - Minimum Scan time. In the menu it is shown/measured like the "Latency" setting - in 1/10th of millisecond. It can be changed between 1 and 100 which correspond to 0.1ms and 10ms respectively.
For my kit it doesn't make much of a difference since my pads produce the strongest signal peak in the very beginning of a signal. It may be different for you. Important, if you have a dual piezo/piezo pad you should set MinScan for this pad equal or close to each other between Head/Bow and Rim/Edge inputs.
Note, this version breaks compatibility with MegaDrum Controller for 22 inputs

Edit: see a newer version further down in the thread.
16MHz 22 Inputs: deleteted.
20MHz 22 Inputs: deleteted
16MHz 32 Inputs: deleteted
20MHz 32 Inputs: deleteted

[elrules]

Simply great dmitri. I look forward to having free time to start building my own megadrum

[Synthex]

Thanks for this version

Note, this version breaks compatibility with MegaDrum Controller for 22 inputs

Does anyone can provide new versions ?

[estregan]

I want to test this but I'd like to request for 12Mhz version pls.

[dmitri]

Try this one. There are more improvements in this version.

Edit: see a newer version further down in the thread .

[dmitri]

A new test version. It has further improvements to the previous test version. Unless somebody notices something wrong with it, I will post this version in the proper 'Announcements' threads.

[Synthex]

I have problems with the latest version.
The menu hangs at some point ...

[dmitri]

Can you describe a bit more? Can I reproduce it?

[Synthex]

Can you describe a bit more? Can I reproduce it?

I use this version : megadrum32_20_32_20080209.hex
When I turn on the Megadrum, the display is not good, the characters are half erased, and the menu became caught ...

[dmitri]

Can you try 16MHz version?