kick input is not working

Discussions related to MegaDrum Hardware

Re: kick input is not working

Postby dmitri » Wed Jun 16, 2010 2:43 pm

theloner wrote:this night i connect pot hihatpedal to jack1( chanel 2, hihatpedal ). it's not working

Have no idea what you mean by "jack1", "channel 2" and "it's not working" and how a not working hihat pedal is related to "kick input is not working".
We are going in circles and it is not making it simple to help you.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: kick input is not working

Postby Firelord » Wed Jun 16, 2010 2:47 pm

This is why I recommend posting a photo of your analogue board. Try to make it as clear as possible. In the previous thread where an "automatic MIDI signal" problem was discussed there is a couple of pictures, but I'd like to see new ones focused on the analogue board.
Firelord
 
Posts: 666
Joined: Wed Jun 10, 2009 7:50 pm
Location: Estonia

Re: kick input is not working

Postby theloner » Thu Jun 17, 2010 11:03 am

When you touch pin 13 of the first MUXer with screwdrive i seen reaction in the kick and sometime hihatpedal VU-meter.
When you touch pin 14 of the first MUXer with screwdrive i didn't see reaction in kick VU-meter
theloner
 
Posts: 25
Joined: Fri Apr 16, 2010 6:20 am

Re: kick input is not working

Postby dmitri » Thu Jun 17, 2010 12:47 pm

theloner wrote:When you touch pin 13 of the first MUXer with screwdrive i seen reaction in the kick and sometime hihatpedal VU-meter.
When you touch pin 14 of the first MUXer with screwdrive i didn't see reaction in kick VU-meter

If you touch pin 3 of the first MUXer do you see activity an all first 8 VU-meters (4 top and 4 bottom VU-meters)?
If this is the case then it is definitely one of the causes listed in viewtopic.php?p=15140#p15140
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: kick input is not working

Postby theloner » Thu Jun 17, 2010 1:06 pm

Yes I seen activity an all first 8 VU-meters.
theloner
 
Posts: 25
Joined: Fri Apr 16, 2010 6:20 am

Re: kick input is not working

Postby mackanov » Fri Jun 18, 2010 12:06 am

Check your jack and cable, since everything else seems to be in order.
mackanov
 
Posts: 46
Joined: Mon Mar 08, 2010 2:05 pm
Location: Brazil

Re: kick input is not working

Postby theloner » Thu Jun 24, 2010 2:02 am

i changed d9,d10 diode and r18 but kick input still not working.
theloner
 
Posts: 25
Joined: Fri Apr 16, 2010 6:20 am

Re: kick input is not working

Postby dmitri » Thu Jun 24, 2010 8:54 am

Why did you change d9, d10 and R18? Were they faulty?
Apart from suggestions I've already given on how to fix the issue I cannot think of any other suggestions. It is still one of these:
1. a break/short on this input.
2. R18 is much higher than 100 Ohm.
3. D9 and/or D10 are faulty or soldered with reverse polarity.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: kick input is not working

Postby theloner » Tue Jul 13, 2010 3:53 am

i built new analog board and kick still not working............ :mrgreen:
theloner
 
Posts: 25
Joined: Fri Apr 16, 2010 6:20 am

Re: kick input is not working

Postby dmitri » Tue Jul 13, 2010 9:15 am

Bad weather, constant sun storm. I'm out of realistic ideas why your kick input is not working. Use any other input for kick, thankfully MegaDrum has plenty of them.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 113 guests