Megadrum Gallery

[rockdude]

Akkue39!

That's just insanely beautiful! Looks very professional!

[maniqu]

Akkue39, amazing

[janif]

I found out that old ICan digital TV set top box is perfectly sized for Synthex 3.2 + input kits.





Final:

[rockdude]

Looks great Janif!

[whiskey29]

I bought 2 premade megadrum by Dmitri, 1 for me and 1 for my brother.
(According to Dmitri, it was the first two Unit that are using encrypted bootloade:) )

But after looking to the picures people posted, now jealousy kicks in..
I want to solder one my self too now

Now some parts are hard to find here.
I know I gotta get the IC from Dmitri,
but those resistor, capacitor with exact value might not be available. Is it ok to replace it with closest value ?

[jman 31]

For the most part it is better to stick with the value specified unless you have a good grasp on what each component does. Which version megadrum do you intend to build? There is a complete list of parts from mouser.com for the Synthex v2.5

[whiskey29]

For the most part it is better to stick with the value specified unless you have a good grasp on what each component does. Which version megadrum do you intend to build? There is a complete list of parts from mouser.com for the Synthex v2.5

Its the All In One PCB v3.2 by Synthex . I already talked to Dmitri and Synthex for the missing parts.
If I manage to build a working megadrum, I will post it here too

[Cysign]

I soldered my MegaDrum one year ago...but first I had no tools to create a case....and then I forgot to build the case.
But now I finally want to use it....so I build a previous-version of my case... the parts don'T fit exactly.... but I guess my idea is perfect for use:







On my final version (I will build it if there's no snow outside...cause I have no room for working...) I will place the keypad next to the display and perhaps I'll remove one holder...we'll see.
Just to inspire you

[timekeeper]

I soldered my MegaDrum one year ago...but first I had no tools to create a case....and then I forgot to build the case.
But now I finally want to use it....so I build a previous-version of my case... the parts don'T fit exactly.... but I guess my idea is perfect for use:







On my final version (I will build it if there's no snow outside!) I will plase the keypad next to the display and perhaps I'll remove one holder...we'll see.
Just to inspire you

Great idea!!!

[Ramsh]

I got it from Dmitri