Some questions

Discussions related to MegaDrum Hardware

Re: Some questions

Postby krzak » Wed May 25, 2011 10:34 am

Is it better to use a DF or D7?
krzak
 
Posts: 24
Joined: Tue May 10, 2011 9:56 am

Re: Some questions

Postby dmitri » Wed May 25, 2011 11:17 am

D7
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Some questions

Postby krzak » Wed May 25, 2011 2:49 pm

A little bit I do not understand what is a full swing oscillator. I think that I use the normal resonator, something like a list of components. Exactly such as http://www.nikomp.com.pl/opisy/RV000/RVREZ49U.htm whether the programming D7 should everything will work properly?

I confuse these resonators, oscillators, and whatever else is.
krzak
 
Posts: 24
Joined: Tue May 10, 2011 9:56 am

Re: Some questions

Postby dmitri » Wed May 25, 2011 3:01 pm

Both DF and D7 will work.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Some questions

Postby krzak » Sat Jun 04, 2011 8:10 pm

If I use 74hc4851, then I need to replace the input resistor by jumpers and skip diodes. But the resistors R1 and R34 have to be soldered?

Should Amtega644 at 20Mhz work properly with PIC18LF2550 at 12MHz?
krzak
 
Posts: 24
Joined: Tue May 10, 2011 9:56 am

Re: Some questions

Postby dmitri » Sat Jun 04, 2011 10:38 pm

krzak wrote:If I use 74hc4851, then I need to replace the input resistor by jumpers and skip diodes. But the resistors R1 and R34 have to be soldered?

Yes.

Should Amtega644 at 20Mhz work properly with PIC18LF2550 at 12MHz?

Yes.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Some questions

Postby krzak » Fri Jun 10, 2011 10:18 pm

LCD shows the active inputs, but on the PC nothing happens. I checked on the MCT and the MM, and MIDI logs shows nothing. The MCT showed a few times, but for a moment, and then nothing again. The computer detects Megadrum, and it is in the list of system hardware. In what could be the problem?
krzak
 
Posts: 24
Joined: Tue May 10, 2011 9:56 am

Re: Some questions

Postby dmitri » Fri Jun 10, 2011 10:29 pm

1. Breaks/shorts between pin 15 of Atmega and pin 18 of PIC
2. Mismatch between MegaDrum firmware and crystal frequency.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Some questions

Postby krzak » Sat Jun 11, 2011 10:00 am

It works. Just have to get rid of the latency is pretty high.

In the MIDI Speed ​​I have only two speeds to choose.

Do Last unecrypted firmware don't have in MIDI Speed to choose MIDI+USB, USB only 1, USB only 2, USB only 3?
krzak
 
Posts: 24
Joined: Tue May 10, 2011 9:56 am

Re: Some questions

Postby dmitri » Sat Jun 11, 2011 10:13 am

krzak wrote:It works.

You just switched it on another time and it worked?

Just have to get rid of the latency is pretty high.

Really? How high?

In the MIDI Speed ​​I have only two speeds to choose.

Do Last unecrypted firmware don't have in MIDI Speed to choose MIDI+USB, USB only 1, USB only 2, USB only 3?

In viewtopic.php?f=3&t=1075 you can see that this option was added only in version 20110424
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 73 guests