Megadrum and dtronic q5 module

[hani38]

hi
I have a cheap drum module who I got together with drums d-tronic q5 I wonder if it is able to connect it via midi to megadrum to use build-in sounds from module. So far I managed to get the sounds from the bank marked var0 (by connecting it via midi to megadrum nad changing note number from 0 to 127). Do any of you have an idea how to force megadrum to use other sound banks? I did some internal research and found out that the module is built on the SAM 2553 chip and flash memory with sounds. Chip specification can be found at dream.fr below i put scan of the list of sounds and MIDI Implementation chart which have been included in the manual.

[dmitri]

MegaDrum can be configured to send Program Change messages. Usually PC MIDI messages are used to switch between different sound banks.

[hani38]

Thanks for extra fast reply Dmitri but can you give me specific instructions on how to do it because I am completely green with these midi stuff.
I would like to obtain, for example, sounds from the AD in the heads and sounds from the module on rims is this possible?

[dmitri]

It's in the MegaDrum documentation: http://www.megadrum.info/content/pads-settings

[hani38]

can you show me on example of one pad configuration how to set head note No 42 and on the rim any sound from the bank var2

[dmitri]

With PC messages you can only switch a whole bank. Look in your module manual how to create a custom bank with all required sounds.