Strange behavior when playing

[zenoise]

Hello, i'm having some problem with my MD.
The output doesn't match the pad i've hit.
If i hit pad 1 a couple of time, and then pad 2, the output for the first 2-3 hits on pad 2 is still pad 1.
If i keep on hitting pad 2 at some point the output change to the correct pad 2 note, at this point, if i hit a different pad, i'll have the same problem: pad 2 note for the first 2-3 hits, and then the correct note for the pad i'm hitting, and so on.

(sorry for my bad english, i hope it's clear enough).

I'm using a basic kit by dimitri, and the config is mostly default, except for autoloadconf, allgainslow and quickaccess.

I've made some change to pad settings, but nothing fancy (mostly note, threshold, hilevel)

I'm using megadrum with a cheap onboard realtek card, so i'm not sure if the problem is in my laptop or in my module.

what can i try/check?

[zenoise]

nevermind, i have no idea about what was wrong, but after updating the firmware and manually resetting the whole config it's now working flawlessly.

[dmitri]

nevermind, i have no idea about what was wrong, but after updating the firmware and manually resetting the whole config it's now working flawlessly.

It is in the changes log:

Changes in version 20110717:

1. The (ultimate) fix for the same MIDI over USB bug (lagging one message behind).

[zenoise]

FYI: i'm still experiencing the same problem, from time to time, let's say 1 out of 10 time.
It's not bothering me at all, and it might be related to some assembling error, as i discovered today that i probably have a couple of input wire reversed, so i'm going to disassemble the whole thing to check the wiring.