Megadrum Gallery

[alpanov]

Here is my DIY set. Snare drum and Kick — 12". Toms — 10". PEACE mesh heads were used.









More details and pictures are here (but in Russian only, sorry).

[kupooglop]

@alpanov - Very nice job!

[angr77]

MD_Sticker_Cover_2.png

MegaDRUM Stickers project...
I wanted some nice stickers on my MegaDrum box (It comes without) to make it look better. So I designed a front for the box in Adobe Illustrator.

I am still not 100 precent satisfied with the stickers...yet
•First i measured the box’s front plate and redraw it in Illustrator.
•Then I took a digital photo of the box and then cutted out the front panel in photoshop and pasted it in Illustrator into the drawn illustrator frontpanel.
•Now, I was able to redraw where all holes(LCD, Buttons etc) of the Megadrum should be located gray area as a markers in the front panel. (To be able to cut it out after printing the original)
•Then I added some nice sticker text to all buttons in the design and printed it out.

I have now continued the project and trimmed the design slightly. Print it on Inkjet Sticker Vinyl Film…Added some “clear” self adhesive sticker above it as protection. I have also made some adjustments to the length of the rotary encoders – cut them by 3 mm, painted all nuts and washers in black color.

I am not totally satisfied yet…stay tuned…updates will follow. Last I will add a LCD-frame in front of the LCD. I found one that I think will work at Conrads.se.

[kupooglop]

DIY A to E kick drum trigger that replaced my DIY practice pad kick drum trigger.

DSCI0266.jpg

DSCI0265.jpg

[angr77]

My MegaDRUM based drumset...

MD_RACK3.png

setup2.png

Check my project for a complete story!

[everson]

My megadrum is "stock", built by dmitri, but here`s my kit. There`s an obvious lack of cymbals, but I`m working on that issue ...

[deathbyart]

[quote="everson"]My megadrum is "stock", built by dmitri, but here`s my kit. There`s an obvious lack of cymbals, but I`m working on that issue ...



Everson,
How is your monitor attached to the rack? I have a Pearl Rack and would love to do that.

[everson]

I detached the monitor`s bottom plate, and its "leg" is hollow. So I sticked a painting brush (yes, you read it right ) in the "leg" and its other side in the rack.
Let me know if you need clarifications

BTW, here are some more pics:

[airflamesred]

Lovely looking kit and interesting set up. Is that 4 toms across the front?

[everson]

Actually 5.
2x10", 2x12" and 1x14"
(and plus the 14" snare drum)