Megadrum with 3-zone TCS Pads

Discussions related to MegaDrum Hardware

Megadrum with 3-zone TCS Pads

Postby JoeR » Wed May 23, 2012 8:14 pm

Hi folks

I've read through a lot of the forum content here (which is staggering and impressive to say the least) but I am still unsure about something. I was wondering if TCS Yamaha pads will work to the same effect as Rubber/Mesh pads with Megadrum? From what I understand already the pads do not work with non-yamaha modules, and I haven't noticed any megadrum compatibility either. Does anyone know the answer or has anyone tried it? :D
JoeR
 
Posts: 3
Joined: Wed May 23, 2012 5:56 pm

Re: Megadrum with 3-zone TCS Pads

Postby dmitri » Wed May 23, 2012 8:49 pm

I've tested MegaDrum with XP120SD, http://uk.yamaha.com/en/products/musica ... mode=model, and it works fine with all 3 zones. Note that the rotary controller on the pad won't do anything.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Megadrum with 3-zone TCS Pads

Postby JoeR » Fri May 25, 2012 8:32 pm

Superb, this information has made me very happy indeed! I hope you don't mind me asking a couple other things...

A)Do the 3-zone tom inputs work in the same way as the 3-zone yammie cymbals? That is, can i plug it in 1 input and be done, or do I need to do some electrical/soldering stuff before hand?

B)Lastly, I now know tha pad works but could you mention whether or not the pad performed as well as you would expect with regards to dynamics and sensitivity etc compared to it's rubber/mesh counterparts? I just want to be sure ;)
JoeR
 
Posts: 3
Joined: Wed May 23, 2012 5:56 pm

Re: Megadrum with 3-zone TCS Pads

Postby dmitri » Fri May 25, 2012 11:24 pm

JoeR wrote:Superb, this information has made me very happy indeed! I hope you don't mind me asking a couple other things...

A)Do the 3-zone tom inputs work in the same way as the 3-zone yammie cymbals? That is, can i plug it in 1 input and be done, or do I need to do some electrical/soldering stuff before hand?

XP120SD uses one stereo jack for 3 zones. I believe all Yanaha 3 zone pads/cymbals use one stereo jack. No soldering is required.

B)Lastly, I now know tha pad works but could you mention whether or not the pad performed as well as you would expect with regards to dynamics and sensitivity etc compared to it's rubber/mesh counterparts? I just want to be sure ;)

When I tested it, it triggered perfectly well. About the feel I cannot tell much. It is definitely better than regular rubber pads. In comparison to mesh pads it is a matter of taste.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Megadrum with 3-zone TCS Pads

Postby JoeR » Sat May 26, 2012 9:37 am

Great!! I really appreciate the time taken to help me out Dmitri, I think you are doing a fantastic job with Megadrum and im definitely going to get one of these bad boys now (and by now I mean when I have the money)! :D
JoeR
 
Posts: 3
Joined: Wed May 23, 2012 5:56 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 84 guests