PCY135 and PCY155 Help Please, Thanks!

Discussions related to MegaDrum Hardware

Re: PCY135 and PCY155 Help Please, Thanks!

Postby dmitri » Tue Dec 25, 2012 10:07 pm

Did you actually test the resistance between the ring and the sleeve?
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: PCY135 and PCY155 Help Please, Thanks!

Postby chunkyfatboy » Tue Dec 25, 2012 10:46 pm

Okay so something huge happened. While looking for the ring and sleeve like you posted for the multi meter i realized that my specific cable didn't have this at all. When I switched the cable with another one that had the ring and the sleeve (it has two black bands) it started reading completely differently. I didn't know that the cable itself had anything to with it. I would have never realized the difference if you hadn't pointed this out. Thank goodness for the great Dmitri!

My band will be very happy to start using our 3 zone rides and crashes.

As always the MegaDrum is capable of handling any situation possible, which is exactly why i love my 56 input MegaDrum.

Once again thanks for your patience!
chunkyfatboy
 
Posts: 12
Joined: Mon Jun 04, 2012 5:55 pm

Re: PCY135 and PCY155 Help Please, Thanks!

Postby angr77 » Wed Dec 26, 2012 6:50 pm

Hi!

Would you like to post your working settings for pcy 135/155??

Best regards.

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: PCY135 and PCY155 Help Please, Thanks!

Postby Maylord.war » Thu Dec 27, 2012 2:27 am

Hi, i don't know if this info are useful but my pcy150s works fine

I see a 2.6ohm by pressing the bell switch , with a diode tester my multimeter emit a "beep" to confirm the continuity of connection

The edge switch make a 9,95k by pressing the edge switch.

:D

i hope it will be helpful ;)

I'm glad you solved
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: PCY135 and PCY155 Help Please, Thanks!

Postby angr77 » Thu Dec 27, 2012 6:50 am

Great!

How does your settings look like in mdm for pcy150?

Best regards

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: PCY135 and PCY155 Help Please, Thanks!

Postby Maylord.war » Thu Dec 27, 2012 11:53 pm

Hi, i've the mds file but i don't know how i can upload here...

The uploader under the forum not accept mds extension.

I can zipped into a compressed zip or rar file?

Thanks
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: PCY135 and PCY155 Help Please, Thanks!

Postby angr77 » Fri Dec 28, 2012 12:56 am

A zipped file of the mds file will work!!

Best regards

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: PCY135 and PCY155 Help Please, Thanks!

Postby Maylord.war » Sun Dec 30, 2012 1:00 am

Hi Angr

Here's the zip file with mds.

NOTE:

I've set the trimmer under the cymbal in the middle of trip.

Don't know if the DyLvl , DynTime and Minscan are influences on Switch channel ( i thinks no, working only for Piezo Type Channel, i'm waiting confirm by Dmitri) :D
You do not have the required permissions to view the files attached to this post.
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: PCY135 and PCY155 Help Please, Thanks!

Postby angr77 » Wed Jan 02, 2013 11:52 am

Great! Thanks!!
I have stoolen this setup to my MegaDRUM PAD Library...

Best Regards

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: PCY135 and PCY155 Help Please, Thanks!

Postby mj15003 » Wed May 29, 2013 9:19 am

Even after reading this this, it is still not totally clear to me, if the edge input on the 3zone ride is only for choking or it can be used also as velocity sensitive switch trigger for crash/riding, i.e. punch note in Superior Drummer?

BR.
Miroslav
Mapex Horizon, Megadrum + ArchLinux (LinuxSampler) + ESI Juli@, PCY155, PCY135, Triggera Effect Cymbal Pack, Zildjian 14" HiHat + FastCrash, 682Drums Meshheads, Aquarian InHeads, Aquarian OnHeads, Yamaha XP80, Yamaha DT50S & DT50K
mj15003
 
Posts: 17
Joined: Tue May 07, 2013 11:10 am
Location: Zilina, Slovakia

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 87 guests