Hi Hat & softs problems

[drumdhiver]

Hi,

I'm using this hi hat :
http://fr.yamaha.com/fr/products/musica ... mode=model
After wiring a jack cable specialy to work with HH and megadrum, I can see now the HH's variations on the vu meter.

I managed to see visual midi on drummanager, only once a time. I could seen a violet bar's variation. I don't know why, I canno't re-do this while the module indicate that HH signal is alive.

I have some crash with manager, sometimes I send orders and soft freeze, is it error on operation?

I understand that there's a sequence to start manager :
1-start manager
2-put on megadrum
3- tik : use same in/out, init port on startup
4- i don't know why, I have megadrum1 (& 2) on my desktop, and Audio USB device 1 (&2) on my laptop... So using port 1
5- clik OK

Get green, Sysex OK. (I should get midi error despite this process)

[dmitri]

I'm probably lost in translation but from the description I don't understand what the problem is.

[drumdhiver]

Hi Dimitri,

In fact, the real problems are :

-1 )I had got a violet bar for hi hat, on the right side of the virtual midi window. When I played HiHat, I think I should see grey bars, but nothing

-2) I had got a violet bar before(1), and I don't know what i did, I am not able to get it now

Excuse me Dimitri, sometimes hard to explain reals problems

[dmitri]

1. The HiHat pedal must be configured as F.Contr to send MIDI CC 4 messages
2. The LowLevel and HighLevel must be configured appropriately for your HiHat pedal. http://www.megadrum.info/forums/viewtop ... f=3&t=2082 could be of help in configring LowLevel and HighLevel.

[drumdhiver]

Thank you Dimitri,
I will try it