a little help needed with just a couple of questions.

Discussions related to MegaDrum Hardware

Re: a little help needed with just a couple of questions.

Postby marcjwebbmusic » Fri Mar 15, 2013 5:26 pm

the atmega644 and so that i can get it with the protected boot loader.
thanks

marc
marcjwebbmusic
 
Posts: 124
Joined: Mon Mar 11, 2013 8:36 pm

Re: a little help needed with just a couple of questions.

Postby marcjwebbmusic » Fri Mar 15, 2013 5:50 pm

pleaes could you link me to the count for the atmel 644
marcjwebbmusic
 
Posts: 124
Joined: Mon Mar 11, 2013 8:36 pm

Re: a little help needed with just a couple of questions.

Postby dmitri » Fri Mar 15, 2013 7:23 pm

marcjwebbmusic wrote:the atmega644 and so that i can get it with the protected boot loader.

For the millionth time, I don't program others chips.

marcjwebbmusic wrote:pleaes could you link me to the count for the atmel 644

I don't count any 'atmel 644'.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: a little help needed with just a couple of questions.

Postby marcjwebbmusic » Fri Mar 15, 2013 8:38 pm

i do apolagise.

so what chip can i get from you with 40 pins and with the protected boot loader.


Sorry, I don't do this. If go "DIY MegaDrum" way then from me you can get only Atmega644 with the programmed protected bootloader. See viewtop ... f=3&t=2147


is this not the same AVR???

thanks

marc
marcjwebbmusic
 
Posts: 124
Joined: Mon Mar 11, 2013 8:36 pm

Re: a little help needed with just a couple of questions.

Postby dmitri » Fri Mar 15, 2013 8:53 pm

marcjwebbmusic wrote:so what chip can i get from you with 40 pins and with the protected boot loader.

Please, can somebody else explain it in other words? Definitely my English is not good enough.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: a little help needed with just a couple of questions.

Postby marcjwebbmusic » Fri Mar 15, 2013 8:57 pm

the only reason why i am still not getting it is because you say that only you can load the protected boot loader but you dont do any chips.

but then i see a number of posts where you are programming 11 atmega644 chips and then say you dont programme them?

i just want to be able to get a protected bootloader AVR that fits the schematic in the first post on the 32 input model.

with regards to the firmware version you mentioned previous, what kind of differences will there be different to the newest version.

for example:

features with the newest version of firmware without boot loader and same with????

thanks

marc
marcjwebbmusic
 
Posts: 124
Joined: Mon Mar 11, 2013 8:36 pm

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Bing [Bot] and 90 guests