Nepos first Test > No Signal

[Nepo]

Hello Dimitri,

the red is a fix testclamp for pin15 and the black is a loose testpin.

First I connected testpin on the pin 6 (see Pic 502) , then I take photo of the result without releasing (Pic 503).

I do it for pin14 in the same way see Pic 504 & 505.

I can do it for 24 & 32 & 2 also but its the same...

br

Jörg

[dmitri]

Sorry, I don't understand it fully. Answer Yes or No to the questions below.

1. Do you get any VU-meter activity on inputs inputs 6, 14, 24 and 32 without connecting anything?
2. When you get VU-meter activity on input 6, do you have anything connected to this input?
3. When you have something connected on the input 6 only, do you get VU-meter activity on inputs inputs 14, 24 and 32 where there is nothing connected to them?

[Nepo]

1. Do you get any VU-meter activity on inputs inputs 6, 14, 24 and 32 without connecting anything?

No connention, no signal!

2.When you get VU-meter activity on input 6, do you have anything connected to this input?

Yes, I connected PIN15 (red clamp) & PIN6 (Black testpin)> permantent signal witout any hit on piezo.

3. When you have something connected on the input 6 only, do you get VU-meter activity on inputs inputs 14, 24 and 32 where there is nothing connected to them?

No , when I connected to pin6 , I got only one permanent signal on VU
The same is with 14, 24, 32 (& 2) ....one connection , one pemanent signal on VU but at a other place...see pics.

br

Jörg

[dmitri]

Raise Threshold or lower Gain on the input until you get no signal.

[Nepo]

Hello Dimitri,

when I tune with gain the signal went to a normal peak.

Seems to be working....which impact these have to an insrument we will see.

The next step is to use MD with an computersoftware.....

Thanks for your paitience!

br

Jörg